Mine is a little more complex tho. I tapped F8 and held it down and I didn't get a menu that allowed me to boot it into safe mode. I was in such a panic when I saw the black screen with the flashing cursor on my desktop. After I installed the new system I took the laptop apart and reinstalled the Cmos battery and the system still worked. This error can happen when the computer is not shut down correctly or you have another device plugged in.
When I try to enter a password the curser just keeps on blinking and will not enter any letter. Thank you again for the tips and hope that they also help more people as it has helped me. I am left 1 option to try, format everything and try, Format everything and male partitions a fresh and ten a clean install :non:. Granted that isn't a way to resolve it, nor good to run a lot that way, however it can help narrow down if it is the battery that is causing this. Hope this helps, even though its an old thread. Sometimes it would boot to black screen with blinking cursor and then other times it was fine. He is actually licenced through them to fix there computers or something like that.
As soon as I disconnected the faulty drive, the problem never surfaced again. When remove hard disk,dvd can boot. Im using a toshiba laptop less than a year old and i really need what i have saved on it for school. Same in safe mode as well. I have written an article on the from sleep mode.
Eventually I took it to Best Buy and the guy told me the motherboard was dead. Thanks ahead of time for your help. This is a different problem from the one described above. After that, I would start trying to fix the problem. Also try what said Edit 1: what does Fn + F6 do? If you have any questions ask me and rate + comments are always great! What about your cd or dvd player.
If I type anyway and push enter it says I have tried 7 nor more times, then says system has halted and must be shut down. First make sure the device has been charged. When it came back on, windows wouldn't start up. Since your computer powered on with only the essential hardware installed, those components must work properly. This leads me to believe that the display is not the problem here. Before I went to bed, it appeared to be stuck on step 5 at 13%. At the time I had already done that but the same thing would happen.
If you have installed a program today that caused a problem choose a restore point prior to that? Can someone tell what can be causing this problem. But once he shut it off the problem remained. Extending the screen back resets the mechanism and it should turn on. It does show my cursor moving around, but that's it. You may want to wait a day or two just to see if anyone else posts in here with a different idea. I still get to the black screen with the blinking cursor! My guess is your bios is corrupted or some related motherboard problem.
Pressed F1, F2, F3, F4 and Enter key and then pressed the Power button. No more noises from the hard drive, no screen it's just black , no error messages. Please help I have no clue what to do! You can see the fan starting and stopping. It seems to think about using it, and whirrs around with it for a bit, but I never get anywhere other than black screen, blinking cursor. If you can boot into windows you can use blue screen view to diagnose your crash issues and also post the log for our review.
Also see this article on. The I received the Black Screen with flashing curser. I think is a mobo malfunction, but what can I do? If it detects that the screen has not been opened, it won't power up. I was just using the internet on day and all of a sudden my desktop just began shutting off. It is not a black screen with a movable mouse cursor on the screen it is a black screen with a flashing cursor that has not entered Windows yet.
What I did was that I dug up my giant box of computer parts and found an old hard drive that had Windows installed on it. Then you could go to the applications tab and press on new task. This usually solves the problem. First of all I left my laptop on to download something and slept off, by the time I woke up I saw a blue screen with error messages. It's probably used to restore the computer to first-boot settings. I've never replaced a motherboard in a laptop, but I imagine you could fine a tutorial with a little help from Google or YouTube.
It says Dell, real quick the goes to the black screen, asking for the password with the cursor next to password but when I type nothing enters. If it didn't turn on without the cord in, it should turn on once you it is in. I called a friend… What we did to get into the computer. Computer boots to black screen with cursor windows 7 — Restore your Windows 7 computer If your computer boots to a black screen when using Windows 7 you can always try to recover a working system by using your Operating system disc! So, I erased my windows partition and installed mac on it! Maybe there is a problem with your onboard video now. I used it in the day good and in the even it wont come just a black screen and the lights for the power , speaker and the other control lights are just blinking. My advice is to send it back right away is you have some sort of return option. This is how the system could automatically hibernate when the screen was closed.